欧美极品高清xxxxhd,国产日产欧美最新,无码AV国产东京热AV无码,国产精品人与动性XXX,国产传媒亚洲综合一区二区,四库影院永久国产精品,毛片免费免费高清视频,福利所导航夜趣136

標題: T6963的240128時鐘運行不正常問題請教各位附單片機程序 [打印本頁]

作者: 米花卷 時間: 2021-3-14 17:58
標題: T6963的240128時鐘運行不正常問題請教各位附單片機程序
看大家做的數碼時鐘很漂亮，剛好有一塊閑置的240128液晶屏，想著利用起來，然后找屏的資料，廠家什么的都找不到，反正是T6963的，應該差不多，就按照壇友華仔的24064程序改了，苦于完全不懂編程，只有邊改邊仿真測試，終于仿真通過了，顯示也正常，然后燒錄進STC89C52RC運行是可以，可是字形不對，實在不知道那錯了，發出來求大伙指點下，已經研究了一個星期了，沒有頭緒

字符設定是32*64的，基本能橫向鋪滿屏幕，但是運行出來，后面多了小時位的20和：，而且部分內容顯示不全，比如上面的年月日內容都有缺畫
和重復，

這是仿真出來的，感覺很好呀，差距怎么那么大呢
源程序不會粘先放個壓縮把

24064.rar (11.96 KB, 下載次數: 32)

作者: 米花卷 時間: 2021-3-14 18:00
這樣貼上來行不行？？？？
#include <reg52.h>
//#include <intrins.h>
#include <math.h>

//#define nop()  _nop_()
#define uchar unsigned char
#define uint unsigned int

//1. FG：液晶邊框引出端，應該接地
//2. VSS：邏輯電源地，接電源的負極
//3. VDD：邏輯電源正，接電源的正極
//4. V0：LCD驅動電壓輸入端，可通過滑動變阻器接到電源正極上，改變電阻大小來改變液晶對比度
sbit LCDWR =P3^1;//5. /WR：寫數據信號，上升沿鎖存
sbit LCDRD =P3^2;//6. /RD：讀數據信號，上升沿鎖存
sbit LCDCE =P3^4;//7. /CE：LCD選通信號，低電平有效
sbit LCDCD =P3^3;//8. C/D：命令/數據：高電平為命令，低電平為數據
//9.:暫時沒用
sbit LCDRST =P3^5;//10. /RST：復位信號，低電平有效
#define lcd_bus       P0//11-18. DB0-DB7 :8位數據總線
//19. FS：字體選擇，H:6X8點，L：8X8點
//20. VEE
//21. LEDA：背光電源正極
//22. LEDK：背光電源負極

sbit DQ18B20=P1^3;//ds18b20與單片機連接口

sbit acc0=ACC^0;          //移位時的第0位
sbit acc7=ACC^7;          //移位時用的第7位

sbit DATA1302=P1^5; //時鐘數據接口
sbit RST1302=P1^6;
sbit SCLK1302=P1^4;
sbit menu=P3^0;             //菜單
sbit add=P3^1;             //加一
sbit dec=P3^2;             //減一

uchar second,minute,hour,day,month,year,week,count=0;
uchar ReadValue,num,time;
uint tvalue;//溫度值
uchar tflag;

//----  LCD PIXEL SETTING  ------------------------------------------------------
#define PIXELH 128
#define PIXELW 240

//-------------------------------------------------------------------------------

unsigned char code tab1[]=//16x16的漢字或者圖片[取模方式]從左到右從上到下 :橫向8點左高位
{
0x08,0x00,0x0F,0xFC,0x10,0x80,0x10,0x80,0x20,0x80,0x4F,0xF8,0x88,0x80,0x08,0x80,
0x08,0x80,0x08,0x80,0xFF,0xFE,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,0x00,0x80,//年",0
0x07,0xF0,0x04,0x10,0x04,0x10,0x04,0x10,0x07,0xF0,0x04,0x10,0x04,0x10,0x04,0x10,
0x07,0xF0,0x04,0x10,0x08,0x10,0x08,0x10,0x10,0x10,0x20,0x50,0x40,0x20,0x00,0x00,//月",1
0x00,0x00,0x1F,0xF0,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x1F,0xF0,0x10,0x10,
0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x1F,0xF0,0x10,0x10,0x00,0x00,0x00,0x00,//日",2
0x00,0x00,0x1F,0xF8,0x10,0x08,0x1F,0xF8,0x10,0x08,0x1F,0xF8,0x01,0x00,0x11,0x00,
0x1F,0xFC,0x21,0x00,0x21,0x00,0x4F,0xF8,0x01,0x00,0x01,0x00,0x7F,0xFE,0x00,0x00,//星",3

0x22,0x00,0x22,0x7C,0x7F,0x44,0x22,0x44,0x3E,0x44,0x22,0x7C,0x3E,0x44,0x22,0x44,
0x22,0x44,0xFF,0x7C,0x00,0x44,0x24,0x84,0x22,0x84,0x43,0x14,0x81,0x08,0x00,0x00,//期",4

0x01,0xC0,0x02,0x20,0x02,0xE0,0x02,0x20,0x02,0xE0,0x02,0x20,0x02,0xE0,0x02,0x20,
0x02,0xE0,0x02,0x20,0x0F,0xF8,0x0F,0xF8,0x07,0xF0,0x03,0xE0,0x01,0xC0,0x00,0x00,//"溫度計符號",5

0x00,0x00,0x00,0x00,0x78,0x00,0x48,0xFC,0x49,0x04,0x79,0x04,0x02,0x00,0x02,0x00,
0x02,0x00,0x02,0x00,0x02,0x04,0x01,0x04,0x01,0x08,0x00,0xF0,0x00,0x00,0x00,0x00,//"℃,6

0x00,0x00,0x01,0x00,0x02,0x80,0x04,0x40,0x05,0xC0,0x04,0x40,0x05,0xC0,0x04,0x40,
0x05,0xC0,0x04,0x40,0x05,0xC0,0x04,0x40,0x0F,0xE0,0x07,0xC0,0x03,0x80,0x01,0x00,//溫度計的圖片，7

};

unsigned char code tab2[]=//8x16的字符
{
0x00,0x00,0x00,0x18,0x24,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x24,0x18,0x00,0x00,//0",0
0x00,0x00,0x00,0x10,0x70,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x7C,0x00,0x00,//1",1
0x00,0x00,0x00,0x3C,0x42,0x42,0x42,0x04,0x04,0x08,0x10,0x20,0x42,0x7E,0x00,0x00,//2",2
0x00,0x00,0x00,0x3C,0x42,0x42,0x04,0x18,0x04,0x02,0x02,0x42,0x44,0x38,0x00,0x00,//3",3
0x00,0x00,0x00,0x04,0x0C,0x14,0x24,0x24,0x44,0x44,0x7E,0x04,0x04,0x1E,0x00,0x00,//4",4
0x00,0x00,0x00,0x7E,0x40,0x40,0x40,0x58,0x64,0x02,0x02,0x42,0x44,0x38,0x00,0x00,//5",5
0x00,0x00,0x00,0x1C,0x24,0x40,0x40,0x58,0x64,0x42,0x42,0x42,0x24,0x18,0x00,0x00,//6",6
0x00,0x00,0x00,0x7E,0x44,0x44,0x08,0x08,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x00,//7",7
0x00,0x00,0x00,0x3C,0x42,0x42,0x42,0x24,0x18,0x24,0x42,0x42,0x42,0x3C,0x00,0x00,//8",8
0x00,0x00,0x00,0x18,0x24,0x42,0x42,0x42,0x26,0x1A,0x02,0x02,0x24,0x38,0x00,0x00,//9",9
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0x60,0x00,0x00,//.",10
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//負號，11
0x00,0x00,0x00,0x00,0x10,0x10,0x10,0xFE,0x10,0x10,0x10,0x00,0x00,0x00,0x00,0x00,//正號，12
};
unsigned char code tab3[]=//32x64的手繪數字（3264）
{
0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0xC0,0x07,0xFF,0xFF,0xE0,0x0F,0xFF,0xFF,0xF0,
0x1F,0xFF,0xFF,0xF8,0x3F,0xFF,0xFF,0xFC,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xE0,0x07,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x07,0xFE,0x7F,0xC0,0x07,0xFE,0x7F,0xC0,0x0F,0xFE,0x7F,0xC0,0x0F,0xFE,
0x7F,0xC0,0x1B,0xFE,0x7F,0xC0,0x1B,0xFE,0x7F,0xC0,0x33,0xFE,0x7F,0xC0,0x33,0xFE,
0x7F,0xC0,0x63,0xFE,0x7F,0xC0,0x63,0xFE,0x7F,0xC0,0xC3,0xFE,0x7F,0xC0,0xC3,0xFE,
0x7F,0xC1,0x83,0xFE,0x7F,0xC1,0x83,0xFE,0x7F,0xC3,0x03,0xFE,0x7F,0xC3,0x03,0xFE,
0x7F,0xC6,0x03,0xFE,0x7F,0xC6,0x03,0xFE,0x7F,0xCC,0x03,0xFE,0x7F,0xCC,0x03,0xFE,
0x7F,0xD8,0x03,0xFE,0x7F,0xD8,0x03,0xFE,0x7F,0xF0,0x03,0xFE,0x7F,0xF0,0x03,0xFE,
0x7F,0xE0,0x03,0xFE,0x7F,0xE0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xE0,0x07,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x3F,0xFF,0xFF,0xFC,0x1F,0xFF,0xFF,0xF8,
0x0F,0xFF,0xFF,0xF0,0x07,0xFF,0xFF,0xE0,0x03,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00, //0

0x00,0x00,0x00,0x00,0x00,0x00,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0xFF,0xFC,0x00,
0x0F,0xFF,0xFC,0x00,0x0F,0xFF,0xFC,0x00,0x0F,0xFF,0xFC,0x00,0x0F,0xFF,0xFC,0x00,
0x0F,0xFF,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,
0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xFC,0x00,0x00,0x00,0x00,0x00,//:\字模\32-64用\1.BMP

0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0xC0,0x07,0xFF,0xFF,0xE0,0x0F,0xFF,0xFF,0xF0,
0x1F,0xFF,0xFF,0xF8,0x3F,0xFF,0xFF,0xFC,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xE0,0x07,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x00,0x00,0x07,0xFE,0x00,0x00,0x0F,0xFE,0x00,0x00,0x1F,0xFE,
0x00,0x00,0x3F,0xFE,0x00,0x00,0x7F,0xFE,0x00,0x00,0xFF,0xFC,0x00,0x01,0xFF,0xF8,
0x00,0x03,0xFF,0xF0,0x00,0x07,0xFF,0xE0,0x00,0x0F,0xFF,0xC0,0x00,0x1F,0xFF,0x80,
0x00,0x3F,0xFF,0x00,0x00,0x7F,0xFE,0x00,0x00,0xFF,0xFC,0x00,0x01,0xFF,0xF8,0x00,
0x03,0xFF,0xF0,0x00,0x07,0xFF,0xE0,0x00,0x0F,0xFF,0xC0,0x00,0x1F,0xFF,0x80,0x00,
0x3F,0xFF,0x00,0x00,0x7F,0xFE,0x00,0x00,0x7F,0xFC,0x00,0x00,0x7F,0xF8,0x00,0x00,
0x7F,0xF0,0x00,0x00,0x7F,0xE0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,
0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x00,0x00,0x00,0x00,//2

0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0xC0,0x07,0xFF,0xFF,0xE0,0x0F,0xFF,0xFF,0xF0,
0x1F,0xFF,0xFF,0xF8,0x3F,0xFF,0xFF,0xFC,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xE0,0x07,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x00,0x00,0x03,0xFE,
0x00,0x00,0x03,0xFE,0x00,0x00,0x07,0xFE,0x00,0x00,0x0F,0xFC,0x00,0xFF,0xFF,0xF8,
0x00,0xFF,0xFF,0xF0,0x00,0xFF,0xFF,0xF0,0x00,0xFF,0xFF,0xE0,0x00,0xFF,0xFF,0xF0,
0x00,0xFF,0xFF,0xF0,0x00,0xFF,0xFF,0xF8,0x00,0xFF,0xFF,0xFC,0x00,0xFF,0xFF,0xFE,
0x00,0x00,0x0F,0xFE,0x00,0x00,0x07,0xFE,0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,
0x00,0x00,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xE0,0x07,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x3F,0xFF,0xFF,0xFC,0x1F,0xFF,0xFF,0xF8,
0x0F,0xFF,0xFF,0xF0,0x07,0xFF,0xFF,0xE0,0x03,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,//3

0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0xE0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,
0x00,0x00,0x7F,0xE0,0x00,0x00,0x7F,0xE0,0x00,0x00,0xFF,0xE0,0x00,0x00,0xFF,0xE0,
0x00,0x01,0xFF,0xE0,0x00,0x01,0xFF,0xE0,0x00,0x03,0xFF,0xE0,0x00,0x03,0xFF,0xE0,
0x00,0x07,0xFF,0xE0,0x00,0x07,0xFF,0xE0,0x00,0x0F,0xFF,0xE0,0x00,0x0F,0xFF,0xE0,
0x00,0x1F,0xFF,0xE0,0x00,0x1F,0xFF,0xE0,0x00,0x3F,0xFF,0xE0,0x00,0x3F,0xFF,0xE0,
0x00,0x7F,0xBF,0xE0,0x00,0x7F,0xBF,0xE0,0x00,0xFF,0x3F,0xE0,0x00,0xFF,0x3F,0xE0,
0x01,0xFE,0x3F,0xE0,0x01,0xFE,0x3F,0xE0,0x03,0xFC,0x3F,0xE0,0x03,0xFC,0x3F,0xE0,
0x07,0xF8,0x3F,0xE0,0x07,0xF8,0x3F,0xE0,0x0F,0xF0,0x3F,0xE0,0x0F,0xF0,0x3F,0xE0,
0x1F,0xE0,0x3F,0xE0,0x1F,0xE0,0x3F,0xE0,0x3F,0xC0,0x3F,0xE0,0x3F,0xC0,0x3F,0xE0,
0x7F,0x80,0x3F,0xE0,0x7F,0x80,0x3F,0xE0,0x7F,0x00,0x3F,0xE0,0x7F,0x00,0x3F,0xE0,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,
0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,
0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,
0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x00,0x00,//F:\字模\32-64用\4-1.BMP

0x00,0x00,0x00,0x00,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,
0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,
0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,
0x7F,0xCF,0xFF,0xC0,0x7F,0xDF,0xFF,0xE0,0x7F,0xFF,0xFF,0xF0,0x7F,0xFF,0xFF,0xF8,
0x7F,0xFF,0xFF,0xFC,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xE0,0x07,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,
0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,
0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xE0,0x07,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x3F,0xFF,0xFF,0xFC,0x1F,0xFF,0xFF,0xF8,
0x0F,0xFF,0xFF,0xF0,0x07,0xFF,0xFF,0xE0,0x03,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,//5

0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0xC0,0x07,0xFF,0xFF,0xE0,0x0F,0xFF,0xFF,0xF0,
0x1F,0xFF,0xFF,0xF8,0x3F,0xFF,0xFF,0xFC,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xE0,0x07,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,
0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,
0x7F,0xDF,0xFF,0xC0,0x7F,0xFF,0xFF,0xE0,0x7F,0xFF,0xFF,0xF0,0x7F,0xFF,0xFF,0xF8,
0x7F,0xFF,0xFF,0xFC,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xE0,0x07,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xE0,0x07,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x3F,0xFF,0xFF,0xFC,0x1F,0xFF,0xFF,0xF8,
0x0F,0xFF,0xFF,0xF0,0x07,0xFF,0xFF,0xE0,0x03,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,//6

0x00,0x00,0x00,0x00,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,
0x00,0x00,0x03,0xFE,0x00,0x00,0x07,0xFC,0x00,0x00,0x07,0xFC,0x00,0x00,0x07,0xFC,
0x00,0x00,0x0F,0xF8,0x00,0x00,0x0F,0xF8,0x00,0x00,0x0F,0xF8,0x00,0x00,0x1F,0xF0,
0x00,0x00,0x1F,0xF0,0x00,0x00,0x1F,0xF0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,
0x00,0x00,0x3F,0xE0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,
0x00,0x00,0xFF,0x80,0x00,0x00,0xFF,0x80,0x00,0x00,0xFF,0x80,0x00,0x01,0xFF,0x00,
0x00,0x01,0xFF,0x00,0x00,0x01,0xFF,0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,0x00,
0x00,0x03,0xFE,0x00,0x00,0x07,0xFC,0x00,0x00,0x07,0xFC,0x00,0x00,0x07,0xFC,0x00,
0x00,0x0F,0xF8,0x00,0x00,0x0F,0xF8,0x00,0x00,0x0F,0xF8,0x00,0x00,0x1F,0xF0,0x00,
0x00,0x1F,0xF0,0x00,0x00,0x1F,0xF0,0x00,0x00,0x3F,0xE0,0x00,0x00,0x3F,0xE0,0x00,
0x00,0x3F,0xE0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,0x00,0x7F,0xC0,0x00,
0x00,0xFF,0x80,0x00,0x00,0xFF,0x80,0x00,0x00,0xFF,0x80,0x00,0x01,0xFF,0x00,0x00,
0x01,0xFF,0x00,0x00,0x01,0xFF,0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,0x00,0x00,
0x03,0xFE,0x00,0x00,0x07,0xFC,0x00,0x00,0x07,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,//7

0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0xC0,0x07,0xFF,0xFF,0xE0,0x0F,0xFF,0xFF,0xF0,
0x1F,0xFF,0xFF,0xF8,0x3F,0xFF,0xFF,0xFC,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xE0,0x07,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xE0,0x07,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xFF,0xFF,0xFC,
0x3F,0xFF,0xFF,0xF8,0x1F,0xFF,0xFF,0xF0,0x0F,0xFF,0xFF,0xE0,0x07,0xFF,0xFF,0xF0,
0x0F,0xFF,0xFF,0xF8,0x1F,0xFF,0xFF,0xFC,0x3F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xF0,0x0F,0xFE,0x7F,0xE0,0x07,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xE0,0x07,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x3F,0xFF,0xFF,0xFC,0x1F,0xFF,0xFF,0xF8,
0x0F,0xFF,0xFF,0xF0,0x07,0xFF,0xFF,0xE0,0x03,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00, //8

0x00,0x00,0x00,0x00,0x03,0xFF,0xFF,0xC0,0x07,0xFF,0xFF,0xE0,0x0F,0xFF,0xFF,0xF0,
0x1F,0xFF,0xFF,0xF8,0x3F,0xFF,0xFF,0xFC,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xE0,0x07,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xE0,0x07,0xFE,0x7F,0xF0,0x0F,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x3F,0xFF,0xFF,0xFE,0x1F,0xFF,0xFF,0xFE,0x0F,0xFF,0xFF,0xFE,0x07,0xFF,0xFF,0xFE,
0x03,0xFF,0xFB,0xFE,0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,
0x00,0x00,0x03,0xFE,0x00,0x00,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,0x7F,0xC0,0x03,0xFE,
0x7F,0xE0,0x07,0xFE,0x7F,0xF0,0x0F,0xFE,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x3F,0xFF,0xFF,0xFC,0x1F,0xFF,0xFF,0xF8,
0x0F,0xFF,0xFF,0xF0,0x07,0xFF,0xFF,0xE0,0x03,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,//9

};
uchar code tab4[]= //8x64的字符:
{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x7E,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7E,0x3C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x7E,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0x7E,0x3C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//
};
uchar code tab5[]= //16x16，星期用
{
      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x7F,0xFE,
      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//一",0
      0x00,0x00,0x00,0x10,0x3F,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x7F,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,//二",1
      0x00,0x00,0x00,0x00,0x7F,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xF8,
      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0xFE,0x00,0x00,0x00,0x00,//三",2
      0x00,0x00,0x7F,0xFC,0x44,0x84,0x44,0x84,0x44,0x84,0x44,0x84,0x44,0x84,0x44,0x84,
      0x48,0x84,0x48,0x7C,0x50,0x04,0x60,0x04,0x40,0x04,0x7F,0xFC,0x40,0x04,0x00,0x00,//四",3
      0x00,0x00,0x7F,0xF8,0x02,0x00,0x02,0x00,0x02,0x00,0x02,0x00,0x02,0x20,0x3F,0xF0,
      0x04,0x20,0x04,0x20,0x04,0x20,0x04,0x20,0x04,0x24,0xFF,0xFE,0x00,0x00,0x00,0x00,//五",4
      0x04,0x00,0x03,0x00,0x01,0x80,0x01,0x00,0xFF,0xFE,0x00,0x00,0x00,0x00,0x04,0x80,
      0x06,0x40,0x04,0x20,0x08,0x10,0x08,0x18,0x10,0x0C,0x20,0x0C,0x40,0x08,0x00,0x00,//六",5
      0x00,0x00,0x1F,0xF0,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x1F,0xF0,0x10,0x10,
      0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x1F,0xF0,0x10,0x10,0x00,0x00,0x00,0x00,//日",6
};
/*****************1ms延時函數****************/
void delay(uint z)
{
      uint x,y;
      for(x=z;x>0;x--)
            for(y=110;y>0;y--);
}
void delay1(uint z) //微秒延時
{
      for(;z>0;z--);
}
unsigned char rd_cmd6963(void)
{
unsigned char addr_st;
LCDCD = 1;
LCDWR = 1;
LCDCE = 0;
lcd_bus =0xff;
addr_st = lcd_bus;
LCDRD = 0;
LCDRD = 1;
LCDCE = 1;
return(addr_st);
}
/*****************檢查忙狀態程序****************/
void chkbusy6963(void)
{
unsigned char busy;
do
      {
               busy =!(rd_cmd6963() & 0x03);
      }while(busy);
}
/*****************寫數據****************/
void wr_dat6963(unsigned char datax)
{
chkbusy6963();
LCDCD = 0;
LCDRD = 1;
LCDCE = 0;
lcd_bus = datax;
LCDWR = 0;
LCDWR = 1;
LCDCE = 1;
}
/*****************寫命令****************/
void wr_cmd6963(unsigned char cmdx)
{
chkbusy6963();
LCDCD = 1;
LCDRD = 1;
LCDCE = 0;
lcd_bus = cmdx;
LCDWR = 0;
LCDWR = 1;
LCDCE = 1;
}

/*****************寫寄存器程序****************/
void wr_reg6963(unsigned char cmd,unsigned char dat1,unsigned char dat2)
{
      wr_dat6963(dat1);
      wr_dat6963(dat2);
      wr_cmd6963(cmd);
}

//顯示指針，圖形模式graphics＝1,文本模式graphics＝0；X坐標x_axis，以8個像素為一個單位
//Y坐標y_axis,圖形模式以1個像素為單位，文本模式以8個像素為單位
void lcd_cursor6963(unsigned char graphics,unsigned char x_axis,unsigned char y_axis)
{
unsigned int tmp;
if(graphics)tmp = y_axis*(PIXELW/8) + x_axis + 0x800;
else  tmp = y_axis*(PIXELW/8) + x_axis;
wr_reg6963(0x24,(unsigned char)(tmp),(unsigned char)(tmp>>8));
wr_cmd6963(0xb0);
}
/*****************液晶屏初始化程序****************/
void init6963(void)
{
      LCDRST =0;
      delay(100);
      LCDRST =1;
      wr_cmd6963(0xf0);                      //bit reset
      wr_reg6963(0x21,0x00,0x00); //光標地址設置
      wr_reg6963(0x22,0x00,0x00);          //CGRAM偏置地址設置
      wr_reg6963(0x24,0x00,0x00); //顯示地址設置
      wr_reg6963(0x40,0x00,0x00);  //文本顯示區首地址
      wr_reg6963(0x41,(unsigned char)(PIXELW/8),0x00);  //文本顯示區寬度
      wr_reg6963(0x42,0x00,0x08);  //圖形顯示區首地址
      wr_reg6963(0x43,(unsigned char)(PIXELW/8),0x00);  //圖形顯示區寬度
      wr_cmd6963(0x80);             // OR mode
      wr_cmd6963(0x9c);             //文本圖形開
      wr_cmd6963(0xa0);             //7line指針
}
/*****************全屏顯示內容程序****************/
void lcd_showfull(unsigned char datx)
{
      unsigned int i;
      lcd_cursor6963(0,0,0);
      for(i=0;i<((PIXELW/8)*(PIXELH/8));i++)wr_dat6963(0);
      wr_cmd6963(0xb2);
      lcd_cursor6963(1,0,0);
      for(i=0;i<((PIXELW/8)*PIXELH);i++)wr_dat6963(datx);
      wr_cmd6963(0xb2);                                  //屏刷完后需要補上這句
}
//顯示自定義16X16字符,x_axis為X軸，以8像素為單位，y_axis為Y軸，以1像素為單位
void lcd_defcharacter16x16(unsigned char x_axis,unsigned char y_axis,unsigned char ctnchar,unsigned char startchar,unsigned char code *text)
{//ctnchar為要顯示的總字符數,startchar為自定義內碼的第幾個啟動顯示字符(即表格中的漢字),text為自定義的字符內碼
unsigned char line,ctn;
text += startchar*32;
for(ctn=0;ctnchar>0;ctnchar--,ctn+=2)
   {
               for(line=0;line<16;line++)
               {
                        lcd_cursor6963(1,x_axis+ctn,y_axis+line);
                     wr_dat6963(*(text++));
                        wr_dat6963(*(text++));
                     wr_cmd6963(0xb2);                      //屏刷完后需要補上這句
               }
      }
}
//顯示自定義8X16字符,x_axis為X軸，以8像素為單位，y_axis為Y軸，以1像素為單位
void lcd_defcharacter8x16(unsigned char x_axis,unsigned char y_axis,unsigned char ctnchar,unsigned char startchar,unsigned char code *text)
{//ctnchar為要顯示的總字符數,startchar為自定義內碼的第幾個啟動顯示字符(即表格中的漢字),text為自定義的字符內碼
unsigned char line,ctn;
text=text + startchar*16;
for(ctn=0;ctnchar>0;ctnchar--,ctn++)
   {
               for(line=0;line<16;line++)
               {
                        lcd_cursor6963(1,x_axis+ctn,y_axis+line);
                        wr_dat6963(*(text++));
                     wr_cmd6963(0xb2);                      //屏刷完后需要補上這句
               }
      }
}
//顯示自定義32X64字符,x_axis為X軸，以8像素為單位，y_axis為Y軸，以1像素為單位
void lcd_defcharacter32x64(uchar x_axis,uchar y_axis,uchar ctnchar,uchar startchar,uchar code *text)
{//ctnchar為要顯示的總字符數,startchar為自定義內碼的第幾個啟動顯示字符(即表格中的漢字),text為自定義的字符內碼
uchar line,ctn;
text=text+startchar*256; //256是字符表中一個字的碼數
for(ctn=0;ctnchar>0;ctnchar--,ctn=ctn+4)
   {
               for(line=0;line<64;line++)
               {
                        lcd_cursor6963(1,x_axis+ctn,y_axis+line);//
                     wr_dat6963(*(text++));//這一段是豎刷次數32/8=4次。四條
                     wr_dat6963(*(text++));
                     wr_dat6963(*(text++));
      wr_dat6963(*(text++));
                     wr_cmd6963(0xb2);                      //復位自動讀寫模式，屏刷完后需要補上這句
               }
      }
}

//顯示自定義8X64字符（：）,x_axis為X軸，以8像素為單位，y_axis為Y軸，以1像素為單位
void lcd_defcharacter8x48(uchar x_axis,uchar y_axis,uchar ctnchar,uchar startchar,uchar code *text)
{
      //ctnchar為要顯示的總字符數
      //startchar為自定義內碼的第幾個啟動顯示字符(即表格中的漢字)
      //text為自定義的字符內碼
uchar line,ctn;
  text=text+startchar*64; //
for(ctn=0;ctnchar>0;ctnchar--,ctn=ctn+2)
   {
               for(line=0;line<64;line++)
               {
                        lcd_cursor6963(1,x_axis+ctn,y_axis+line);//
                     wr_dat6963(*(text++));
                     wr_cmd6963(0xb2);                      //復位自動讀寫模式，屏刷完后需要補上這句
               }
      }
}

void Write1302(uchar dat) //1302寫
{
      uchar i;
      SCLK1302=0;          //拉低SCLK，為脈沖上升沿寫入數據做好準備
      delay1(2);    //稍微等待，使硬件做好準備
      for(i=0;i<8;i++)    //連續寫8個二進制位數據
         {
               DATA1302=dat&0x01; //取出dat的第0位數據寫入1302
               delay(2);    //稍微等待，使硬件做好準備
               SCLK1302=1;          //上升沿寫入數據
               delay1(2);    //稍微等待，使硬件做好準備
               SCLK1302=0;          //重新拉低SCLK，形成脈沖
               dat>>=1;       //將dat的各數據位右移1位，準備寫入下一個數據位
         }
}
void WriteSet1302(uchar Cmd,uchar dat)
{
         RST1302=0;          //禁止數據傳遞
         SCLK1302=0;       //確保寫數居前SCLK被拉低
         RST1302=1;          //啟動數據傳輸
         delay1(2);    //稍微等待，使硬件做好準備
         Write1302(Cmd);  //寫入命令字
         Write1302(dat);  //寫數據
         SCLK1302=1;       //將時鐘電平置于已知狀態
         RST1302=0;          //禁止數據傳遞
}
uchar Read1302(void)
{
         uchar i,dat;
         delay(2);    //稍微等待，使硬件做好準備
         for(i=0;i<8;i++) //連續讀8個二進制位數據
         {
                  dat>>=1;    //將dat的各數據位右移1位，因為先讀出的是字節的最低位
                  if(DATA1302==1) //如果讀出的數據是1
                  dat|=0x80; //將1取出，寫在dat的最高位
                  SCLK1302=1;    //將SCLK置于高電平，為下降沿讀出
                  delay1(2);  //稍微等待
                  SCLK1302=0;    //拉低SCLK，形成脈沖下降沿
                  delay1(2);  //稍微等待
         }
      return dat;       //將讀出的數據返回
}
uchar  ReadSet1302(uchar Cmd)
{
      uchar dat;
      RST1302=0;                //拉低RST
      SCLK1302=0;             //確保寫數居前SCLK被拉低
      RST1302=1;                //啟動數據傳輸
      Write1302(Cmd);    //寫入命令字
      dat=Read1302();    //讀出數據
      SCLK1302=1;             //將時鐘電平置于已知狀態
      RST1302=0;             //禁止數據傳遞
      return dat;       //將讀出的數據返回
}
void Init_DS1302(void)
{
      WriteSet1302(0x8E,0x00);//根據寫狀態寄存器命令字，寫入不保護指令
      WriteSet1302(0x80,0x00);//根據寫秒寄存器命令字，寫入秒的初始值
      WriteSet1302(0x82,0x30);//根據寫分寄存器命令字，寫入分的初始值
      WriteSet1302(0x84,0x20);//根據寫小時寄存器命令字，寫入小時的初始值
      WriteSet1302(0x86,0x13);//根據寫日寄存器命令字，寫入日的初始值
      WriteSet1302(0x88,0x03);//根據寫月寄存器命令字，寫入月的初始值
      WriteSet1302(0x8c,0x21);//根據寫年寄存器命令字，寫入年的初始值
      WriteSet1302(0x8a,0x06);//根據寫星期寄存器命令字，寫入星期的初始值
}
void DisplaySecond(uchar x)
{
      uchar i,j;
      i=x/10;
      j=x%10;
      lcd_defcharacter24x48(22,18,1,i,tab3);//顯示秒的十位tab3是24*48數字
      lcd_defcharacter24x48(26,18,1,j,tab3);//顯示秒的個位
}
void DisplayMinute(uchar x)
{
      uchar i,j;
      i=x/10;
      j=x%10;
      lcd_defcharacter24x48(11,18,1,i,tab3);//顯示分鐘的十位
      lcd_defcharacter24x48(15,18,1,j,tab3);//顯示分鐘的個位
}
void DisplayHour(uchar x)
{
      uchar i,j;
      i=x/10;
      j=x%10;
      lcd_defcharacter24x48(0,18,1,i,tab3);//顯示小時的十位
      lcd_defcharacter24x48(4,18,1,j,tab3);//顯示小時的個位
}
void DisplayDay(uchar x)
{
      uchar i,j;

      i=x/10;
      j=x%10;
      lcd_defcharacter8x16(10,0,1,i,tab2);//顯示  日的十位tab2是8*16字符數字，帶+-號
      lcd_defcharacter8x16(11,0,1,j,tab2);//顯示日的個位
}
void DisplayMonth(uchar x)
{
      uchar i,j;
      i=x/10;
      j=x%10;
      lcd_defcharacter8x16(6,0,1,i,tab2);//顯示  月的十位
      lcd_defcharacter8x16(7,0,1,j,tab2);//顯示月的個位
}
void DisplayYear(uchar x)
{
      uchar i,j;
      i=x/10;
      j=x%10;
      lcd_defcharacter8x16(2,0,1,i,tab2);//顯示年的十位
      lcd_defcharacter8x16(3,0,1,j,tab2);//顯示年的個位
}
void DisplayWeek(uchar x)
{
      lcd_defcharacter16x16(19,0,1,x-1,tab5);//顯示，tab5是星期用字庫
}
void  read_date(void)
{
   ReadValue = ReadSet1302(0x81);
   second=((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
   ReadValue = ReadSet1302(0x83);
   minute=((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
   ReadValue = ReadSet1302(0x85);
   hour=((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
   ReadValue = ReadSet1302(0x87);
   day=((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
   ReadValue = ReadSet1302(0x89);
   month=((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
   ReadValue = ReadSet1302(0x8d);
   year=((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
   ReadValue=ReadSet1302(0x8b);                   //讀星期
   week=ReadValue&0x07;
   DisplaySecond(second);
   DisplayMinute(minute);
   DisplayHour(hour);
   DisplayDay(day);
   DisplayMonth(month);
   DisplayYear(year);
   DisplayWeek(week);
}
void turn_val(char newval,uchar flag,uchar  newaddr,uchar s1num)
{
      newval=ReadSet1302(newaddr);                   //讀取當前時間
newval=((newval&0x70)>>4)*10+(newval&0x0f); //將bcd碼轉換成十進制
if(flag)                //判斷是加一還是減一
{
      newval++;
      switch(s1num)
      {
                        case 1: if(newval>99) newval=0;
                        DisplayYear(newval);
                                       break;
               case 2: if(newval>12) newval=1;
                                       DisplayMonth(newval);
                                       break;
               case 3: if(newval>31) newval=1;
                              DisplayDay(newval);
                                       break;
               case 4: if(newval>6) newval=0;
                              DisplayWeek(newval);
                                       break;
               case 5: if(newval>23) newval=0;
                              DisplayHour(newval);
                                       break;
               case 6: if(newval>59) newval=0;
                              DisplayMinute(newval);
                                       break;
               case 7: if(newval>59) newval=0;
                              DisplaySecond(newval);
                                       break;
               default:break;
      }
   }
else
{
      newval--;
         switch(s1num)
      {
                     case 1: if(newval==0) newval=99;
               DisplayYear(newval);
                              break;
               case 2: if(newval==0) newval=12;
                                 DisplayMonth(newval);
                     break;
               case 3: if(newval==0) newval=31;
                                 DisplayDay(newval);
                     break;
               case 4: if(newval<0) newval=6;
                     DisplayWeek(newval);
                              break;
         case 5: if(newval<0) newval=23;
                     DisplayHour(newval);
                              break;
         case 6: if(newval<0) newval=59;
                     DisplayMinute(newval);
                              break;
         case 7: if(newval<0) newval=59;
                     DisplaySecond(newval);
                              break;
                     default:break;
      }
      }
      WriteSet1302((newaddr-1),((newval/10)<<4)|(newval%10));  //將新數據寫入寄存器
}
void delay_18B20(unsigned int i)//延時1微秒
{
      while(i--);
}
void ds1820rst()/*ds1820復位*/
{
      unsigned char x=0;
      DQ18B20 = 1;       //DQ復位
      delay_18B20(4);  //延時
      DQ18B20 = 0;       //DQ拉低
      delay_18B20(100); //精確延時大于480us
      DQ18B20 = 1;       //拉高
      delay_18B20(40);
}
uchar ds1820rd()/*讀數據*/
{
  unsigned char i=0;
  unsigned char dat = 0;
  for (i=8;i>0;i--)
  {
      DQ18B20 = 0; //給脈沖信號
dat>>=1;
DQ18B20 = 1; //給脈沖信號
if(DQ18B20)
dat|=0x80;
delay_18B20(10);
  }
  return(dat);
}
void ds1820wr(uchar wdata)/*寫數據*/
{
      unsigned char i=0;
for (i=8; i>0; i--)
{
         DQ18B20 = 0;
   DQ18B20 = wdata&0x01;
   delay_18B20(10);
   DQ18B20 = 1;
   wdata>>=1;
}
}
read_temp()/*讀取溫度值并轉換*/
{
  uchar a,b;
  ds1820rst();
  ds1820wr(0xcc);//*跳過讀序列號*/
  ds1820wr(0x44);//*啟動溫度轉換*/
  ds1820rst();
  ds1820wr(0xcc);//*跳過讀序列號*/
  ds1820wr(0xbe);//*讀取溫度*/
  a=ds1820rd();
  b=ds1820rd();
  tvalue=b;
  tvalue<<=8;
  tvalue=tvalue|a;
  if(tvalue<0x0fff)
   tflag=0;
  else
{
               tvalue=~tvalue+1;
               tflag=1;
}
  tvalue=tvalue*(0.625);//溫度值擴大10倍，精確到1位小數
return(tvalue);
}
void ds1820disp()//溫度值顯示
{
      lcd_defcharacter8x16(24,0,1,(tvalue%1000/100),tab2);//顯示溫度的十位
      lcd_defcharacter8x16(25,0,1,(tvalue%1000%100/10),tab2);//顯示溫度的個位
      lcd_defcharacter8x16(27,0,1,(tvalue%1000%100%10),tab2);//顯示溫度的小數
      if(tflag==0)
               lcd_defcharacter8x16(23,0,1,12,tab2);//顯示溫度的+號
   else
            lcd_defcharacter8x16(23,0,1,11,tab2);//顯示溫度顯-號
}
main()
{
      lcd_showfull(0);                                        //清屏
      init6963(); //初始化
      Init_DS1302();    //初始化1302
      lcd_defcharacter8x16(0,0,1,2,tab2);//顯示 2-固定顯示
      lcd_defcharacter8x16(1,0,1,0,tab2);//顯示 0-固定顯示
      lcd_defcharacter16x16(4,0,1,0,tab1);//顯示年-固定顯示
      lcd_defcharacter16x16(8,0,1,1,tab1);//顯示月-固定顯示
      lcd_defcharacter16x16(12,0,1,2,tab1);//顯示日-固定顯示
      lcd_defcharacter16x16(15,0,1,3,tab1);//顯示星-固定顯示
      lcd_defcharacter16x16(17,0,1,4,tab1);//顯示期-固定顯示
      lcd_defcharacter16x16(21,0,1,7,tab1);//顯示 -固定顯示溫度計圖片
      lcd_defcharacter8x16(26,0,1,10,tab2);//顯示       -固定顯示小數點.
      lcd_defcharacter16x16(28,0,1,6,tab1);//顯示 -固定顯示攝氏度圖片
      lcd_defcharacter8x48(9,18,1,0,tab4);//顯示-固定顯示：（前兩點）
      lcd_defcharacter8x48(20,18,1,0,tab4);//顯示-固定顯示：(后兩點)

      //lcd_defcharacter16x16(21,16,2,17,tab1);//顯示農歷兩個字
      //lcd_defcharacter16x16(25,16,1,19,tab1);//顯示羊字
      //lcd_defcharacter16x16(27,16,1,20,tab1);//顯示年字

while(1)
   {
         read_date();
         read_temp();//讀取溫度
         ds1820disp();//顯示
      }
}

作者: 米花卷 時間: 2021-3-15 01:37
這個程序錯誤太多，秒走的時快時慢，最長2.5秒動一下，按鍵也不起作用，時的累計到23點完了是12點然后才一點，沒什么實用價值，還是放棄了算了，那個大哥能給個好用的8k內的240128程序嗎

作者: 達達別 時間: 2021-9-3 19:53
我好像看過能顯示的貼子樓主使用的是STC89單片機嗎?我記得帖子里面寫的是要使用12系列

作者: rayin 時間: 2021-9-5 15:07
設置一個定時器，用來定時按鍵掃描，和LCD刷新時間。上面這個main主程序直接就是循環讀寫，是不行的。

作者: 3花木城 時間: 2022-4-13 20:33
想問一個，是240128 ,還是24064

作者: mengsiu 時間: 2022-5-25 23:20

幾年前在黃魚淘了一片T6963的240128顯示屏，在網上找了很多的資料，終于成功點亮了。

目前該顯示屏已做成時鐘，至今運行正常。

作者: fsj5098 時間: 2022-7-10 09:04
FS：字體選擇，H:6X8點，L：8X8點 fs要接低電平

歡迎光臨 (http://m.raoushi.com/bbs/)