欧美极品高清xxxxhd,国产日产欧美最新,无码AV国产东京热AV无码,国产精品人与动性XXX,国产传媒亚洲综合一区二区,四库影院永久国产精品,毛片免费免费高清视频,福利所导航夜趣136

標題: 音樂盒猜歌名單片機Proteus仿真程序 [打印本頁]

作者: ldy0602332 時間: 2019-10-21 19:28
標題: 音樂盒猜歌名單片機Proteus仿真程序
仿真原理圖如下（proteus仿真工程文件可到本帖附件中下載）

單片機源程序如下:
#include <reg51.h>
#define uchar unsigned char       //宏的定義變量類型 uchar 代替 unsigned char
#define uint  unsigned int       //宏的定義變量類型 uint  代替 unsigned int
uchar  dis_buf;          //顯示緩存
uchar  temp;
uchar  key,a,b,c,d,e,f,g,h,k,m,n,p,q,r,s,t,bb,cc;             //鍵順序碼
void delay(uchar x);    //x*0.14MS

#define LCDLCDDisp_Off 0x3e
#define LCDLCDDisp_On 0x3f
#define Page_Add    0xb8//頁地址
#define LCDCol_Add    0x40//列地址
#define Start_Line    0xC0//行地址
/*****液晶顯示器的端口定義*****/
#define data_ora P0 /*液晶數據總線*/
sbit LCDMcs=P2^1 ; /*片選1*/
sbit LCDScs=P2^2 ; /*片選2*/
sbit RESET=P2^3 ;  /*復位信號*/
sbit LCDDi=P2^4 ;    /*數據/指令選擇*/
sbit LCDRW=P2^5 ;    /*讀/寫選擇*/
sbit LCDEnable=P2^6 ;    /*讀/寫使能*/

sbit key1=P1^0;
sbit key2=P1^1;
sbit key3=P1^2;
sbit key4=P1^3;

sbit LED_R=P1^6;
sbit LED_G=P1^7;
sbit SPK = P3^7;
uchar tone_h;             //高音
uchar tone_l;             //低音
uint note = 1;             //音符
uchar beat;                      //節拍
uchar a=0;

unsigned int Num0=0,Num1=0,Num2=0,Num3=0,Num4=0,Num5=0,Num6=0;
bit flag0,flag_up,flag_dn,flag_door,flag_keyoff,flag_bb,flag_cc,flag1,flag2,flag3,flag4,flag5,flag6,flag7,flag8,flag9;
bit flag_1_up, flag_2_up,flag_2_dn, flag_3_up,flag_3_dn,flag_4_dn;

unsigned char code Bmp0[]=
{
/*------------------------------------------------------------------------------
  源文件 / 文字 : 來自剪貼板! /已選樓層
  寬×高（像素）: 64×16
  字模格式/大小 : 單色點陣液晶字模，縱向取模，字節倒序/256字節
  數據轉換日期  : 2018-6-22
------------------------------------------------------------------------------*/
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0xC0,0x80,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0xC0,0x30,0x1E,0x10,0x10,0x10,0xFF,0x10,0x10,0x10,0x10,0x18,0x10,0x00,0x00,
0x00,0x00,0x00,0xFE,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0xFF,0x02,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x04,0x0C,0x18,0x38,0x38,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x41,0x40,0x42,0x42,0x42,0x42,0x42,0x7F,0x42,0x42,0x42,0x43,0x42,0x60,0x40,0x00,
0x00,0x00,0x00,0x7F,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x7F,0x00,0x00,0x00,0x00
};
unsigned char code Bmp1[]=
{
/*------------------------------------------------------------------------------
  源文件 / 文字 : 來自剪貼板!/當前樓層
  寬×高（像素）: 64×16
  字模格式/大小 : 單色點陣液晶字模，縱向取模，字節倒序/256字節
  數據轉換日期  : 2018-6-22
  ------------------------------------------------------------------------------*/
0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x0C,0x08,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x10,0x10,0x10,0xFF,0x90,0x50,0xFE,0x42,0x42,0xC2,0x42,0x42,0xFF,0x02,0x00,0x00,
0x10,0x21,0x62,0x06,0x80,0xFE,0x22,0xE2,0x22,0x22,0x22,0x22,0xBF,0x02,0x00,0x00,
0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x18,0x10,0x00,
0x00,0x00,0x04,0x0C,0x18,0x38,0x38,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x02,0x42,0x81,0x7F,0x40,0x20,0x1E,0x10,0x20,0x7F,0x44,0x44,0x46,0x64,0x20,0x00,
0x04,0x04,0x7E,0x81,0x60,0x1F,0x00,0x3F,0x48,0x44,0x42,0x41,0x41,0x40,0x70,0x00
};
unsigned char code Bmp2[]=
{
/*------------------------------------------------------------------------------
  源文件 / 文字 : 來自剪貼板!/升降狀態
  寬×高（像素）: 64×16
  字模格式/大小 : 單色點陣液晶字模，縱向取模，字節倒序/256字節
  數據轉換日期  : 2018-6-22
  ------------------------------------------------------------------------------*/
0x00,0x04,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0xC4,0x86,0x04,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x02,0xF2,0x12,0x12,0x12,0xFE,0x12,0x12,0x12,0xFE,0x12,0x12,0x12,0xFB,0x12,0x00,
0x00,0x00,0x00,0xFC,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0xFE,0x04,0x00,0x00,0x00,
0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x30,0x20,0x00,
0x00,0x00,0x04,0x0C,0x18,0x38,0x38,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0xFF,0x10,0x08,0x04,0x03,0x14,0x08,0x04,0x03,0x04,0x48,0x98,0x7F,0x00,0x00,
0x00,0x80,0x40,0x23,0x11,0x19,0x01,0x01,0x01,0x09,0x11,0x23,0x60,0xC0,0x00,0x00
};
unsigned char code Bmp3[]=
{
/*------------------------------------------------------------------------------
  源文件 / 文字 : 來自剪貼板!/開門狀態
  寬×高（像素）: 64×16
  字模格式/大小 : 單色點陣液晶字模，縱向取模，字節倒序/256字節
  數據轉換日期  : 2018-6-22
  ------------------------------------------------------------------------------*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};
unsigned char code Bmp4[]=
{
/*------------------------------------------------------------------------------
  源文件 / 文字 : 來自剪貼板!/  上升
  寬×高（像素）: 64×16
  字模格式/大小 : 單色點陣液晶字模，縱向取模，字節倒序/256字節
  數據轉換日期  : 2018-6-22
  ------------------------------------------------------------------------------*/
0x80,0x70,0x00,0xFF,0x10,0x20,0x10,0x10,0xFF,0x10,0x10,0x10,0xF8,0x10,0x00,0x00,
0x00,0x80,0xC0,0xBC,0x84,0x84,0x84,0xF4,0x82,0x82,0x83,0x82,0x80,0xC0,0x80,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0xFF,0x82,0x42,0x22,0x1A,0x07,0x0A,0x12,0x22,0x43,0xC2,0x42,0x00,
0x00,0x40,0x20,0x10,0x0C,0x40,0x80,0x7F,0x00,0x00,0x04,0x08,0x30,0x60,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};
unsigned char code Bmp5[]=
{
/*------------------------------------------------------------------------------
  源文件 / 文字 : 來自剪貼板!/  下降
  寬×高（像素）: 64×16
  字模格式/大小 : 單色點陣液晶字模，縱向取模，字節倒序/256字節
  數據轉換日期  : 2018-6-22
  ------------------------------------------------------------------------------*/
0x10,0xE8,0x27,0xF4,0x2C,0xE0,0x24,0xA4,0xFC,0x22,0x22,0x40,0xFF,0x40,0x30,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x40,0xCF,0x49,0x2F,0x29,0x2F,0x04,0x03,0xFF,0x81,0x42,0x30,0x0F,0x30,0x40,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};
unsigned char code Bmp6[]=
{
/*------------------------------------------------------------------------------
  源文件 / 文字 : 來自剪貼板!/  打開
  寬×高（像素）: 64×16
  字模格式/大小 : 單色點陣液晶字模，縱向取模，字節倒序/256字節
  數據轉換日期  : 2018-6-22
  ------------------------------------------------------------------------------*/
0x40,0x40,0x48,0x48,0x48,0x48,0x7F,0xC8,0x4C,0x68,0x50,0x48,0x4C,0x60,0x40,0x00,
0x00,0x00,0xF8,0x48,0x48,0x48,0xF8,0x4F,0x4A,0x2A,0x2B,0x0A,0xA8,0x18,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x40,0x20,0x10,0x08,0x04,0x7E,0x91,0x90,0x88,0x88,0x84,0x86,0x80,0xE0,0x00,0x00,
0x80,0x40,0x3F,0x80,0x40,0x3C,0x04,0x05,0x05,0x7F,0x85,0x81,0x81,0xE0,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};
unsigned char code Bmp7[]=
{
/*------------------------------------------------------------------------------
  源文件 / 文字 : 來自剪貼板!/  關閉
  寬×高（像素）: 64×16
  字模格式/大小 : 單色點陣液晶字模，縱向取模，字節倒序/256字節
  數據轉換日期  : 2018-6-22
  ------------------------------------------------------------------------------*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};

uchar code chuzhi[3][16]={  //音調對應的計數初值
      0xff,0xff,//占0位
      0xf8,0x8c,//低1
      0xf9,0x5b,//  2
      0xfa,0x15,//  3
      0xfa,0x67,//  4
      0xfb,0x04,//  5
      0xfb,0x90,//  6
      0xfc,0x0c,//低7

      0xff,0xff,//占0位
      0xfc,0x44,//中1
      0xfc,0xac,//  2
      0xfd,0x09,//  3
      0xfd,0x34,//  4
      0xfd,0x82,//  5
      0xfd,0xc8,//  6
      0xfe,0x06,//中7

      0xff,0xff,//占0位
      0xfe,0x22,//高1
      0xfe,0x56,//       2
      0xfe,0x85,//       3
      0xfe,0x9a,//       4
      0xfe,0xc1,//       5
      0xfe,0xe4,//       6
      0xff,0x03 //高7
      };

//****** 測試曲譜 ****** 個位：音調 ，十位：低中高音對應 0 1 2，千百位：節拍 1~16
uint code test2[] = {       120, //曲速暫時未用到
      401,402,403,404,405,406,407,
      611,612,613,614,615,616,617,
      821,822,823,824,825,826,827,
      0xffff       //0xffff表示結尾
};

//****** 生日快樂 ******
uint code test[] = { 120,
      205,205,406,405,411,807,
      205,205,406,405,412,811,
      205,205,415,413,411,407,406,
      314,114,413,411,413,812,
      305,105,406,405,411,807,
      305,105,406,405,412,811,
      305,105,415,413,411,
      407,406,314,114,413,411,412,811,410,
      0xffff
};

void delayms(uint ms)       /*ms 等于1時，延時1ms 等于2時，延時2ms，以此類推*/
{
      uchar a,b,c;                                  //+3
      while(ms--)
{
      for(c=1;c>0;c--)                      //       1+2 = 3
      for(b=142;b>0;b--)                //       1*( 1+142*2)) = 285
         for(a=2;a>0;a--);       //       142*(1+2*2) = 710
      }
}

void delay125ms(uint pai)  //延時 ？*125ms 即？個節拍
{
uchar a,b,c;
      while(pai--)
      {
      for(c=239;c>0;c--)
            for(b=104;b>0;b--)
                     for(a=1;a>0;a--);
      }
}

void system_Ini()
{
         EA = 1;
      ET0 = 1;
      PT0 = 1;
      TMOD = 0x11;
      TH0 = 255;
      TL0 = 255;
}

void  delay(uchar x)
{ uchar j;
while((x--)!=0)  //CPU執行x*12次
{ for(j=0;j<125;j++)
      {;}
}
}

/****************************************************************************
函數功能:LCD延時程序
入口參數:t
出口參數:
****************************************************************************/
void LCDdelay(unsigned int t)
{
      unsigned int i,j;
      for(i=0;i<t;i++);
      for(j=0;j<10;j++);
}
/****************************************************************************
狀態檢查，LCD是否忙

*****************************************************************************/
void CheckState()
{
unsigned char dat,DATA;//狀態信息（判斷是否忙）
LCDDi=0; // 數據\指令選擇，D/I（RS）="L" ，表示 DB7∽DB0 為顯示指令數據
LCDRW=1; //R/W="H" ，E="H"數據被讀到DB7∽DB0
do
{
   DATA=0x00;
   LCDEnable=1;       //EN下降源
      LCDdelay(2);//延時
      dat=DATA;
   LCDEnable=0;
   dat=0x80 & dat; //僅當?shù)?位為0時才可操作(判別busy信號)
}
while(!(dat==0x00));
}
/*****************************************************************************
函數功能:寫命令到LCD程序，RS(DI)=L,RW=L,EN=H，即來一個脈沖寫一次
入口參數:cmdcode
出口參數:
*****************************************************************************/
void write_com(unsigned char cmdcode)
{
CheckState();//檢測LCD是否忙
      LCDDi=0;
      LCDRW=0;
      P0=cmdcode;
      LCDdelay(2);
      LCDEnable=1;
      LCDdelay(2);
      LCDEnable=0;
}
/*****************************************************************************
函數功能:LCD初始化程序
入口參數:
出口參數:
*****************************************************************************/
void init_lcd()
{
      system_Ini();
      LCDdelay(100);
      LCDMcs=1;//剛開始關閉兩屏
      LCDScs=1;
      LCDdelay(100);
      write_com(LCDLCDDisp_Off);       //寫初始化命令
      write_com(Page_Add+0);
      write_com(Start_Line+0);
      write_com(LCDCol_Add+0);
      write_com(LCDLCDDisp_On);

}
/*****************************************************************************
函數功能:寫數據到LCD程序，RS(DI)=H,RW=L,EN=H，即來一個脈沖寫一次
入口參數:LCDDispdata
出口參數:
*****************************************************************************/
void write_data(unsigned char LCDDispdata)
{
CheckState();//檢測LCD是否忙
      LCDDi=1;
      LCDRW=0;
      P0=LCDDispdata;
      LCDdelay(2);
      LCDEnable=1;
      LCDdelay(2);
      LCDEnable=0;
}
/*****************************************************************************
函數功能:清除LCD內存程序
入口參數:pag,col,hzk
出口參數:
*****************************************************************************/
void Clr_Scr()
{
      unsigned char j,k;
      LCDMcs=0; //左、右屏均開顯示
      LCDScs=0;
      write_com(Page_Add+0);
      write_com(LCDCol_Add+0);
      for(k=0;k<8;k++)//控制頁數0-7，共8頁
      {
            write_com(Page_Add+k); //每頁每頁進行寫
               for(j=0;j<64;j++)  //每頁最多可寫32個中文文字或64個ASCII字符
            {
                  write_com(LCDCol_Add+j);
                     write_data(0x00);//控制列數0-63，共64列，寫點內容，列地址自動加1
            }
      }
}
/*****************************************************************************
函數功能:左屏位置顯示
入口參數:page,column,hzk
出口參數:
*****************************************************************************/
void Bmp_Left_Disp(unsigned char page,unsigned char column, unsigned char code *Bmp)
{
      unsigned char j=0,i=0;
      for(j=0;j<2;j++)
      {
            write_com(Page_Add+page+j);
            write_com(LCDCol_Add+column);
            for(i=0;i<64;i++)
                     write_data(Bmp[128*j+i]);
      }
}
void Bmp_Left_Disp1(unsigned char page,unsigned char column, unsigned char code *Bmp)
{
      unsigned char j=0,i=0;
      for(j=0;j<2;j++)
      {
            write_com(Page_Add+page+j);
            write_com(LCDCol_Add+column);
            for(i=0;i<64;i++)
                     write_data(Bmp[64*j+i]);
      }
}

/*****************************************************************************
函數功能:右屏位置顯示
入口參數:page,column,hzk
出口參數:
*****************************************************************************/
void Bmp_Right_Disp(unsigned char page,unsigned char column, unsigned char code *Bmp)
{
      unsigned char j=0,i=0;
      for(j=0;j<2;j++)
      {
            write_com(Page_Add+page+j);
            write_com(LCDCol_Add+column);
            for(i=64;i<128;i++)
                     write_data(Bmp[128*j+i]);
      }
}
void Bmp_Right_Disp1(unsigned char page,unsigned char column, unsigned char code *Bmp)
{
      unsigned char j=0,i=0;
      for(j=0;j<2;j++)
      {
            write_com(Page_Add+page+j);
            write_com(LCDCol_Add+column);
            for(i=0;i<64;i++)
                     write_data(Bmp[64*j+i]);
      }
}

void main()
{
      init_lcd();
      Clr_Scr();
      LCDMcs=0; //左屏開顯示
      LCDScs=1;
      Bmp_Left_Disp1(0,0,Bmp0);
      Bmp_Left_Disp1(2,0,Bmp1);
      Bmp_Left_Disp1(4,0,Bmp2);
      Bmp_Left_Disp1(6,0,Bmp3);

LCDMcs=1; //右屏開顯示
      LCDScs=0;

      Bmp_Right_Disp1(0,0,Bmp4);

      Bmp_Right_Disp1(2,0,Bmp5);
      Bmp_Right_Disp1(4,0,Bmp6);
      Bmp_Right_Disp1(6,0,Bmp7);



      while(1)
{

                              if(test[note] == 0xffff)
            {
                     note = 1;
            }
            if(test[note]%10 != 0)       //音調不為0 【音調為0時表示不發聲，但有節拍】
            {
                     tone_h = TH0 = chuzhi[test[note]%100/10][(test[note]%10)*2 ];             //音調高位【二維數組第1維表示低中高音，第二維表示音調】
                     tone_l = TL0 = chuzhi[test[note]%100/10][(test[note]%10)*2 + 1];       //音調低位
                     TR0 = 1;
            }
            delay125ms(test[note]/100);       //節拍
            TR0 = 0;
            delayms(1);
            note++;

                              while(a==1)
                              {
                                    SPK=1;
                                    if(key4==0)
                                    {
                                             LED_R=1;
                                             LED_G=1;
                                             a=0;
                                             note=0;
                                    }


                              }

      }
}
void timer0() interrupt 1
{
      TH0 = tone_h;
      TL0 = tone_l;
      SPK = ~SPK;
            if(key1==0)
            {
                     LED_G=0;
                     a=1;
            }
            else if(key2==0||key3==0)
            {
                     LED_R=0;
                     a=1;
            }
}

全部資料51hei下載地址：

音樂盒12864（最終）.zip (143.33 KB, 下載次數: 26)

歡迎光臨 (http://m.raoushi.com/bbs/)