欧美极品高清xxxxhd,国产日产欧美最新,无码AV国产东京热AV无码,国产精品人与动性XXX,国产传媒亚洲综合一区二区,四库影院永久国产精品,毛片免费免费高清视频,福利所导航夜趣136

標題: PIC12F675單片機奇怪問題 [打印本頁]

作者: gravedigger 時間: 2019-1-13 02:05
標題: PIC12F675單片機奇怪問題
程序目的是實現上電燈就亮”輸出1“ 定時后”輸出0“

#include<pic.h>

#include <xc.h>
#pragma config FOSC = INTRCIO // Oscillator Selection bits (INTOSC oscillator: I/O function on GP4/OSC2/CLKOUT pin, I/O function on GP5/OSC1/CLKIN)
#pragma config WDTE = OFF    // Watchdog Timer Enable bit (WDT disabled)
#pragma config PWRTE = OFF    // Power-Up Timer Enable bit (PWRT disabled)
#pragma config MCLRE = OFF    // GP3/MCLR pin function select (GP3/MCLR pin function is digital I/O, MCLR internally tied to VDD)
#pragma config BOREN = OFF    // Brown-out Detect Enable bit (BOD disabled)
#pragma config CP = OFF       // Code Protection bit (Program Memory code protection is disabled)
#pragma config CPD = OFF       // Data Code Protection bit (Data memory code protection is disabled)

#define KEY GP3

unsigned char count=0;
unsigned char miao=0;
unsigned char fen=0;

void main()
{
OSCCAL=0b00000100;//intside RC
TRISIO=0b00001000;//IO方向設置
OPTION_REG=0b00000111;//分頻比1：256
TMR0=0;
GP0=1;
  //  GP1=GP2=GP4=GP5=0;  寫進這行燈就一直不亮，不寫就是正常的
while(1)
      {
         if(TMR0==180)//50ms
         {
            TMR0=0;
            count++;
            if(count==20)//1秒定時
            {
                  miao++;
                  count=0;
                  if(miao==5)
                  {
                     miao=0;
                     GP0=0;
                  }
            }

         }
   }
}

作者: gravedigger 時間: 2019-1-21 11:35
有人知道嗎

作者: yfpc2006 時間: 2019-1-27 11:16
印象中我也遇到過類似問題，很久了，記得可能是編譯器優化級別的問題。

歡迎光臨 (http://m.raoushi.com/bbs/)