欧美极品高清xxxxhd,国产日产欧美最新,无码AV国产东京热AV无码,国产精品人与动性XXX,国产传媒亚洲综合一区二区,四库影院永久国产精品,毛片免费免费高清视频,福利所导航夜趣136

標題: mf-rc500讀卡程序 [打印本頁]

作者: hyk1996 時間: 2018-5-29 11:22
標題: mf-rc500讀卡程序
uint8 Mf500Read( uint8 reg )
   {
      uint32 BitMask, AddressMask, Data;
      uint8 val, i;
      Data = 0;
      BitMask = 0;
      AddressMask = 0;
      for( i = 0; i < sizeof( BusAdjust ); i ++ )
      {
            if( reg & 1 << i )
            AddressMask |= 1 << BusAdjust[i];
            BitMask |= 1 << BusAdjust[i];
      }
      IO1DIR = IO1DIR | BitMask;
      IO1CLR = Mf500AlePin;
      IO0SET = Mf500RdPin | Mf500WrPin;
      IO1SET = Mf500CsPin;
      BitMask = ~ BitMask;
      IO1PIN = ( IO1PIN & BitMask ) | AddressMask;
      IO1SET = Mf500AlePin;
      BitMask = ~ BitMask;
      IO1CLR = Mf500AlePin;
      IO1SET = BitMask;
      BitMask = ~ BitMask;
      IO1DIR = IO1DIR & BitMask;
      IO1CLR = Mf500CsPin;
      IO0CLR = Mf500RdPin;
      i = 25;
      while( -- i );
      Data = IO1PIN;
      IO0SET = Mf500RdPin;
      IO1SET = Mf500CsPin;
      val = 0;
      for( i = 0; i < sizeof( BusAdjust ); i ++ )
      {
               if( Data & 1 << BusAdjust[i] )
               val |= 1 << i;
      }
      return val;
   }
   以上程序?yàn)锳RM7的，程序不是按位操作的，但是與時序圖可以吻合。
   FM1702的則為SPI口操作的，和我的設置有些不一樣，所以就不貼了。

我用的是飛思卡爾8位機9S08，讀寄存器的代碼如下
   unsigned char RC500Read(unsigned char Addr)
  {
unsigned char AddrL = 0; //低八位地址
unsigned char AddrH = 0; //高八位地址
unsigned char Date  = 0;

AddrL = Addr & 0x0f;
AddrH = (Addr & 0xf0)>>4;

PTBDD = 1;       //AD0-AD3,Output
PTDDD = 1;       //AD4-AD7,OUTput

RC500_ALE = 0;
RC500_CS  = 1;
RC500_RD  = 1;
RC500_WR  = 1;

RC500_ADL = AddrL; //給地址
RC500_ADH = AddrH;
delay_50us (1);    //延時50uS
RC500_ALE = 1;       //地址鎖存拉高，實則為6位
delay_50us (1);    //延時50uS
RC500_ALE = 0;       //地址鎖存釋放，鎖存完成
delay_50us (1);    //延時50uS，保持地址

PTBDD = 0;       //AD0-AD3,input
PTDDD = 0;       //AD4-AD7,input
RC500_CS  = 0;       //片選拉低
RC500_RD  = 0;       //讀信號
delay_50us (1);
Date = (RC500_ADH << 4)|RC500_ADL; //讀入
RC500_CS  = 1;       //片選拉低
RC500_RD  = 1;       //讀信號

return Date;
}
由于IO的原因，我選擇了兩個IO口，每個IO口都是4位，所以拼起來做了一個8位的口。程序基本參考了imzhangx的。

寫寄存器的代碼
void RC500Write(unsigned char Addr,unsigned char Date)
{
unsigned char AddrL = 0; //低八位地址
unsigned char AddrH = 0; //高八位地址
unsigned char DateL = 0; //低八位數據
unsigned char DateH = 0; //高八位數據

AddrL = Addr & 0x0f;
AddrH = (Addr & 0xf0)>>4;
DateL = Date & 0x0f;
DateH = (Date & 0xf0)>>4;

PTBDD = 1;       //AD0-AD3,Output
PTDDD = 1;       //AD4-AD7,OUTput

RC500_ALE = 0;
RC500_CS  = 1;
RC500_RD  = 1;
RC500_WR  = 1;

RC500_ADL = AddrL; //給地址
RC500_ADH = AddrH;
delay_50us (1);    //延時50uS
RC500_ALE = 1;       //地址鎖存拉高，實則為6位
delay_50us (1);    //延時50uS
RC500_ALE = 0;       //地址鎖存釋放，鎖存完成
delay_50us (1);    //延時50uS，保持地址

RC500_CS  = 0;
RC500_ADL = DateL; //給數據
RC500_ADH = DateH;
RC500_WR  = 0;
delay_50us (1);    //等待寫入
RC500_CS  = 1;
RC500_WR  = 1;       //寫入完成
}

歡迎光臨 (http://m.raoushi.com/bbs/)