亚洲精品1080,天天看特色大片视频,日本午夜精品一区二区三区电影

#include "config.h"
#include<ds1.h>
#include<ds2.h>
#include<ds3.h>
#include<ds4.h>
void UART_init();
void PutFrame(uchar *TXStr);
void DataFrame_Put_init();
void TEMP_init_var();
uchar dataFrame[16]; //定義數據幀長度為16個字節
uchar dataFrame_RI; //數據幀是否己讀取標記
uchar dataFrame_temp[16]; //數據幀臨時緩沖區16個字節
uchar dataFrame_temp_count; //定義數據幀己接收的字節數
//定義發送數據緩沖區
uchar DataFrame_Put[16]={DATAFRAME_HEAD,DEVICEID_1,DEVICEID_2,0,0,0,0,0,0,0,0,0,0,0,0,DATAFRAME_TAIL};
INT32U led1_count; //運行指示燈倒計時變量
uchar led1_count2; //運行指示燈倒計時變量2
INT32U led2_count; //收到心跳倒計時變量
INT32U led3_count; //有數據接收倒計時變量
INT32U led4_count; //有數據發送倒計時變量
#define LED1_COUNT 15000
#define LED2_COUNT 125000
#define LED3_COUNT 100
#define LED4_COUNT 100
//存儲溫度的高8位和底8位
uchar ds_M;
uchar ds_L;
//溫度變量
uchar symbol; //符號位
uchar hundreds; //百位
uchar decade; //十位
uchar unit; //個位
uchar decimal; //小數1位
void main()
{
//串口初始化
UART_init();
while(1)
{
//調試使用
//uchar dataFrame[16] = {DATAFRAME_HEAD,DEVICEID_1,DEVICEID_2,0,0,1,1,0,0,0,0,0,0,0,0,DATAFRAME_TAIL};
//dataFrame_RI = 1; //執行時間2.17微妙
//如果己接收到一幀數據
if(dataFrame_RI == 1) // 執行時間5.42微秒
{
//收到心跳
if(dataFrame[3] == 0 && dataFrame[4] == 0 && dataFrame[5] == 0 && dataFrame[6] == 1){
//收到心跳
DataFrame_Put[3] = 0;
DataFrame_Put[4] = 0;
DataFrame_Put[5] = 0;
DataFrame_Put[6] = 1;
PutFrame(&DataFrame_Put);
led2_count = LED2_COUNT;
}else if(dataFrame[3] == 0 && dataFrame[4] == 0 && dataFrame[5] == 0 && dataFrame[6] == 2){
//收到查詢設備id
DataFrame_Put[3] = 1;
DataFrame_Put[4] = 0;
DataFrame_Put[5] = 0;
DataFrame_Put[6] = 2;
DataFrame_Put[7] = DEVICEID_1;
DataFrame_Put[8] = DEVICEID_2;
DataFrame_Put[9] = 255;
DataFrame_Put[10] = 255;
DataFrame_Put[11] = 255;
DataFrame_Put[12] = 255;
DataFrame_Put[13] = 002;
DataFrame_Put[14] = 001;
PutFrame(&DataFrame_Put);
led3_count = LED3_COUNT;
led4_count = LED4_COUNT;
}else if(dataFrame[3] == 0 && dataFrame[4] == 0 && dataFrame[5] == 0 && dataFrame[6] == 9){
//收到更新用戶信息時間，返回
DataFrame_Put[3] = 1;
DataFrame_Put[4] = 0;
DataFrame_Put[5] = 0;
DataFrame_Put[6] = 9;
PutFrame(&DataFrame_Put);
led3_count = LED3_COUNT;
led4_count = LED4_COUNT;
}else if(dataFrame[3] == 0 && dataFrame[4] == 0 && dataFrame[5] == 1 && dataFrame[6] == 1){ // 執行時間15.19 微秒
//查詢溫度1：0 0 1 1
TEMP_init_var();
DS1_ReadWeather(&ds_M,&ds_L);
Convert_DS_weather(ds_M, ds_L, &symbol, &hundreds, &decade, &unit, &decimal);
DataFrame_Put[3] = 1;
DataFrame_Put[4] = 0;
DataFrame_Put[5] = 1;
DataFrame_Put[6] = 1;
DataFrame_Put[7] = symbol;
DataFrame_Put[8] = hundreds;
DataFrame_Put[9] = decade;
DataFrame_Put[10] = unit;
DataFrame_Put[11] = decimal;
PutFrame(&DataFrame_Put);
led3_count = LED3_COUNT;
led4_count = LED4_COUNT;
}else if(dataFrame[3] == 0 && dataFrame[4] == 0 && dataFrame[5] == 1 && dataFrame[6] == 2){
//查詢溫度2：0 0 1 2
TEMP_init_var();
DS2_ReadWeather(&ds_M,&ds_L);
Convert_DS_weather(ds_M, ds_L, &symbol, &hundreds, &decade, &unit, &decimal);
DataFrame_Put[3] = 1;
DataFrame_Put[4] = 0;
DataFrame_Put[5] = 1;
DataFrame_Put[6] = 2;
DataFrame_Put[7] = symbol;
DataFrame_Put[8] = hundreds;
DataFrame_Put[9] = decade;
DataFrame_Put[10] = unit;
DataFrame_Put[11] = decimal;
PutFrame(&DataFrame_Put);
led3_count = LED3_COUNT;
led4_count = LED4_COUNT;
}else if(dataFrame[3] == 0 && dataFrame[4] == 0 && dataFrame[5] == 1 && dataFrame[6] == 3){ // 執行時間15.19 微秒
//查詢溫度3：0 0 1 3
TEMP_init_var();
DS3_ReadWeather(&ds_M,&ds_L);
Convert_DS_weather(ds_M, ds_L, &symbol, &hundreds, &decade, &unit, &decimal);
DataFrame_Put[3] = 1;
DataFrame_Put[4] = 0;
DataFrame_Put[5] = 1;
DataFrame_Put[6] = 3;
DataFrame_Put[7] = symbol;
DataFrame_Put[8] = hundreds;
DataFrame_Put[9] = decade;
DataFrame_Put[10] = unit;
DataFrame_Put[11] = decimal;
PutFrame(&DataFrame_Put);
led3_count = LED3_COUNT;
led4_count = LED4_COUNT;
}else if(dataFrame[3] == 0 && dataFrame[4] == 0 && dataFrame[5] == 1 && dataFrame[6] == 4){
//查詢溫度4：0 0 1 4
TEMP_init_var();
DS4_ReadWeather(&ds_M,&ds_L);
Convert_DS_weather(ds_M, ds_L, &symbol, &hundreds, &decade, &unit, &decimal);
DataFrame_Put[3] = 1;
DataFrame_Put[4] = 0;
DataFrame_Put[5] = 1;
DataFrame_Put[6] = 4;
DataFrame_Put[7] = symbol;
DataFrame_Put[8] = hundreds;
DataFrame_Put[9] = decade;
DataFrame_Put[10] = unit;
DataFrame_Put[11] = decimal;
PutFrame(&DataFrame_Put);
led3_count = LED3_COUNT;
led4_count = LED4_COUNT;
}else if(dataFrame[3] == 0 && dataFrame[4] == 0 && dataFrame[5] == 2 && dataFrame[6] == 1){
//查詢開關1
DataFrame_Put[3] = 1;
DataFrame_Put[4] = 0;
DataFrame_Put[5] = 2;
DataFrame_Put[6] = 1;
if(SW1 == 0){
DataFrame_Put[7] = 1;
}else{
DataFrame_Put[7] = 2;
}
PutFrame(&DataFrame_Put);
led3_count = LED3_COUNT;
led4_count = LED4_COUNT;
}else if(dataFrame[3] == 0 && dataFrame[4] == 0 && dataFrame[5] == 2 && dataFrame[6] == 2){
//查詢開關2
DataFrame_Put[3] = 1;
DataFrame_Put[4] = 0;
DataFrame_Put[5] = 2;
DataFrame_Put[6] = 2;
if(SW2 == 0){
DataFrame_Put[7] = 1;
}else{
DataFrame_Put[7] = 2;
}
PutFrame(&DataFrame_Put);
led3_count = LED3_COUNT;
led4_count = LED4_COUNT;
}else if(dataFrame[3] == 0 && dataFrame[4] == 0 && dataFrame[5] == 2 && dataFrame[6] == 3){
//查詢開關3
DataFrame_Put[3] = 1;
DataFrame_Put[4] = 0;
DataFrame_Put[5] = 2;
DataFrame_Put[6] = 3;
if(SW3 == 0){
DataFrame_Put[7] = 1;
}else{
DataFrame_Put[7] = 2;
}
PutFrame(&DataFrame_Put);
led3_count = LED3_COUNT;
led4_count = LED4_COUNT;
}else if(dataFrame[3] == 0 && dataFrame[4] == 0 && dataFrame[5] == 2 && dataFrame[6] == 4){
//查詢開關3
DataFrame_Put[3] = 1;
DataFrame_Put[4] = 0;
DataFrame_Put[5] = 2;
DataFrame_Put[6] = 4;
if(SW4 == 0){
DataFrame_Put[7] = 1;
}else{
DataFrame_Put[7] = 2;
}
PutFrame(&DataFrame_Put);
led3_count = LED3_COUNT;
led4_count = LED4_COUNT;
}else if(dataFrame[3] == 2 && dataFrame[4] == 0 && dataFrame[5] == 2 && dataFrame[6] == 1){
//設置開關1
if(dataFrame[7] == 1 && dataFrame[8] == 0 && dataFrame[9] == 0 && dataFrame[10] == 0 && dataFrame[11] == 0 && dataFrame[12] == 0 && dataFrame[13] == 0 && dataFrame[14] == 0){
SW1 = 0;
}
else if(dataFrame[7] == 2 && dataFrame[8] == 0 && dataFrame[9] == 0 && dataFrame[10] == 0 && dataFrame[11] == 0 && dataFrame[12] == 0 && dataFrame[13] == 0 && dataFrame[14] == 0){
SW1 = 1;
}
led3_count = LED3_COUNT;
}else if(dataFrame[3] == 2 && dataFrame[4] == 0 && dataFrame[5] == 2 && dataFrame[6] == 2){
//設置開關2
if(dataFrame[7] == 1 && dataFrame[8] == 0 && dataFrame[9] == 0 && dataFrame[10] == 0 && dataFrame[11] == 0 && dataFrame[12] == 0 && dataFrame[13] == 0 && dataFrame[14] == 0){
SW2 = 0;
}
else if(dataFrame[7] == 2 && dataFrame[8] == 0 && dataFrame[9] == 0 && dataFrame[10] == 0 && dataFrame[11] == 0 && dataFrame[12] == 0 && dataFrame[13] == 0 && dataFrame[14] == 0){
SW2 = 1;
}
led3_count = LED3_COUNT;
}else if(dataFrame[3] == 2 && dataFrame[4] == 0 && dataFrame[5] == 2 && dataFrame[6] == 3){
//設置開關3
if(dataFrame[7] == 1 && dataFrame[8] == 0 && dataFrame[9] == 0 && dataFrame[10] == 0 && dataFrame[11] == 0 && dataFrame[12] == 0 && dataFrame[13] == 0 && dataFrame[14] == 0){
SW3 = 0;
}
else if(dataFrame[7] == 2 && dataFrame[8] == 0 && dataFrame[9] == 0 && dataFrame[10] == 0 && dataFrame[11] == 0 && dataFrame[12] == 0 && dataFrame[13] == 0 && dataFrame[14] == 0){
SW3 = 1;
}
led3_count = LED3_COUNT;
}else if(dataFrame[3] == 2 && dataFrame[4] == 0 && dataFrame[5] == 2 && dataFrame[6] == 4){
//設置開關4
if(dataFrame[7] == 1 && dataFrame[8] == 0 && dataFrame[9] == 0 && dataFrame[10] == 0 && dataFrame[11] == 0 && dataFrame[12] == 0 && dataFrame[13] == 0 && dataFrame[14] == 0){
SW4 = 0;
}
else if(dataFrame[7] == 2 && dataFrame[8] == 0 && dataFrame[9] == 0 && dataFrame[10] == 0 && dataFrame[11] == 0 && dataFrame[12] == 0 && dataFrame[13] == 0 && dataFrame[14] == 0){
SW4 = 1;
}
led3_count = LED3_COUNT;
}
dataFrame_RI = 0; //置數據幀己讀取
DataFrame_Put_init(); //初始化發送幀，為下一次發送數據做準備
}
//LED1運行指示燈閃爍，整個循環在沒有接收數據時，執行一次約40us
if(led1_count > 0){
led1_count--;
}else{
if(led1_count2 == 0){
led1_count2 = 1;
}else{
led1_count2 = 0;
}
led1_count = LED1_COUNT;
}
if(led1_count > 0){
if(led1_count2 == 0){
LED1 = 0;
}else{
LED1 = 1;
}
led1_count--;
}
//收到心跳燈亮20秒
if(led2_count > 0){
LED2 = 0;
led2_count--;
}else{
LED2 = 1;
}
//有數據接收閃一下
if(led3_count > 0){
LED3 = 0;
led3_count--;
}else{
LED3 = 1;
}
//有數據發送閃一下
if(led4_count > 0){
LED4 = 0;
led4_count--;
}else{
LED4 = 1;
}
}
while(1);
}
//初始化輸出幀
void DataFrame_Put_init(){
DataFrame_Put[3] = 0;
DataFrame_Put[4] = 0;
DataFrame_Put[5] = 0;
DataFrame_Put[6] = 0;
DataFrame_Put[7] = 0;
DataFrame_Put[8] = 0;
DataFrame_Put[9] = 0;
DataFrame_Put[10] = 0;
DataFrame_Put[11] = 0;
DataFrame_Put[12] = 0;
DataFrame_Put[13] = 0;
DataFrame_Put[14] = 0;
}
//初始化溫度值
void TEMP_init_var(){
ds_M = 0;
ds_L = 0;
symbol = 0; //符號位
hundreds = 0; //百位
decade = 0; //十位
unit = 0; //個位
decimal = 0; //小數1位
}
//初始化
void UART_init()
{
TMOD = 0x20; //T1工作模式2 8位自動重裝
TH1 = 0xfd;
TL1 = 0xfd; //比特率9600
TR1 = 1; //啟動T1定時器
SM0 = 0;
SM1 = 1; //串口工作方式1 10位異步
REN = 1; //串口允許接收
EA = 1; //開總中斷
ES = 1; //串口中斷打開
}
//串口發送一幀數據函數，一幀16個字節
void PutFrame(uchar *TXStr)
{
uchar i = 0;
while(1){
SBUF=*TXStr;
while(TI == 0); //對方接收后TI置1,停止等待
TI = 0;
i++;
if(i > 15){break;}
TXStr++;
}
}
void UART() interrupt 4
{
if(RI) //檢測是否接收完成
{
uchar temp = SBUF;
RI = 0;
// 如果接收的一幀，第一個字節不是包頭標志，則拋棄這個字節
if(dataFrame_temp_count == 0)
{
if(temp != DATAFRAME_HEAD)
return;
}
//如果接收的一幀，最后一個字節不是包尾標志，則拋棄這幀數據
if(dataFrame_temp_count == 15)
{
if(temp != DATAFRAME_TAIL){
dataFrame_temp_count = 0;
return;
}
}
//將接收的一個字節裝入緩沖區
dataFrame_temp[dataFrame_temp_count] = temp;
dataFrame_temp_count++;
//如果一幀數據接收完
if(dataFrame_temp_count >= 16){
//如果上一幀還沒有讀取，則拋棄這一幀
if(dataFrame_RI == 1){
dataFrame_temp_count = 0;
return;
}
//拷貝一幀數據，并置這一幀數數沒有讀取
dataFrame[0] = dataFrame_temp[0];
dataFrame[1] = dataFrame_temp[1];
dataFrame[2] = dataFrame_temp[2];
dataFrame[3] = dataFrame_temp[3];
dataFrame[4] = dataFrame_temp[4];
dataFrame[5] = dataFrame_temp[5];
dataFrame[6] = dataFrame_temp[6];
dataFrame[7] = dataFrame_temp[7];
dataFrame[8] = dataFrame_temp[8];
dataFrame[9] = dataFrame_temp[9];
dataFrame[10] = dataFrame_temp[10];
dataFrame[11] = dataFrame_temp[11];
dataFrame[12] = dataFrame_temp[12];
dataFrame[13] = dataFrame_temp[13];
dataFrame[14] = dataFrame_temp[14];
dataFrame[15] = dataFrame_temp[15];
dataFrame_temp_count = 0;
dataFrame_RI = 1;
}
}
}

復制代碼

欧美极品高清xxxxhd,国产日产欧美最新,无码AV国产东京热AV无码,国产精品人与动性XXX,国产传媒亚洲综合一区二区,四库影院永久国产精品,毛片免费免费高清视频,福利所导航夜趣136