国产在线观看不卡视频,国产不卡视频一区二区三区四区,国产乱色精品成人免费视频

#include<reg51.h>
#define uchar unsigned char
#define uint unsigned int
int temp;
typedef unsigned int u16; //對數據類型進行聲明定義
typedef unsigned char u8;
sbit LCDE=P1^2;
sbit RS=P1^0;
sbit RW=P1^1;
sbit ADCS=P2^0; //ADC0832 chip seclect
sbit ADDO=P3^7; //ADC0832 k in
sbit ADDI=P3^7; //ADC0832 k in
sbit ADCLK=P3^6; //ADC0832 clock signal
sbit DHTIO=P2^1; //DHT11輸出
sbit LED=P2^7; //LED脈沖驅動
unsigned char code digit[10]={"0123456789"};
volatile uchar K=0;//AD轉換數字量
uint tempshi,tempge,humshi,humge;
unsigned char U8FLAG=0,U8temp=0;
unsigned char U8T_data_H=0,U8T_data_L=0,U8RH_data_H=0,U8RH_data_L=0,U8checkdata=0;
unsigned char str[5];
//humidity 濕度
//temperature 溫度
//integer 整數
//decimal 小數
unsigned char humidity_interger=0,humidity_decimal;
unsigned char temperature_integer=0,temperature_decimal;
unsigned char check;
void delay(unsigned int z) //延時長
{
unsigned char x,y;
for(x=z;x>0;x--)
{
for(y=20;y>0;y--);
}
}
void delay40us()
{
unsigned char a,b;
for(b=3;b>0;b--)
for(a=4;a>0;a--);
}
void delayms(uint del)
{
uint u,v;
for(u=0;u<del;u++)
for(v=0;v<=100;v++);
}
void delay20ms()
{
unsigned char a,b,c;
for(c=1;c>0;c--)
for(b=222;b>0;b--)
for(a=40;a>0;a--);
}
unsigned char Adc0832() //AD轉換,返回結果
{
uchar u=0;
uchar dat=0;
ADCLK=0;
delayms(1);
ADCS=0;//拉低CS端
delayms(1);
ADDI=1;
delayms(1);
ADCLK=1;//拉高CLK端
delayms(1);
ADCLK=0;//拉低CLK端,形成下降沿1
delayms(1);
ADCLK=1;//拉高CLK端
ADDI=1;
delayms(1);
ADCLK=0;//拉低CLK端,形成下降沿2
delayms(1);
ADCLK=1;//拉高CLK端
ADDI=1;
delayms(1);
ADCLK=0;//拉低CLK端,形成下降沿3
delayms(1);
ADDI=1;//控制命令結束
delayms(1);
dat=0;
for(u=0;u<8;u++)
{
ADCLK=1;
delayms(1);
ADCLK=0;//形成一次時鐘脈沖
delayms(1);
dat|=ADDO;//收數據
if(u<7)
dat<<=1;
}
for(u=0;u<8;u++)
{
ADCLK=1;
delayms(1);
ADCLK=0;//形成一次時鐘脈沖
delayms(1);
}
ADCS=1;//拉低CS端
ADCLK=0;//拉低CLK端
ADDO=1;//拉高數據端,回到初始狀態
return dat; //return ad k
}
void dht_start() //等待接受初始化
{
DHTIO=1; //初始高電平
delay40us();
DHTIO=0; //主機拉低電平
delay20ms(); //保持電平時間大于18ms
DHTIO=1; //主機拉高電平
delay40us(); //延遲等待20-40us等待從機響應
}
unsigned char recieve_data() //數據接收
{
unsigned char i,flag,data_byte;
for(i=0;i<8;i++)
{
flag=2;
while((!DHTIO)&&flag++);//等待從機發出50us低電平結束
delay40us(); //延時超過26us-28us不超過70us
data_byte=data_byte<<1;
if(DHTIO) //如果此時dhtio為1則表示此時從機輸出數據為1否則說明此時從機輸出數據為0
{
data_byte|=0x01;
flag=2;
while((DHTIO)&&flag++);//等待剩下的高電平結束
}
if(!flag)
break;
}
return data_byte;
}
void dht_take_sample() //采樣
{
unsigned char flag;
dht_start();
if(!DHTIO) //從機發出響應信號
{
flag=2;
while((!DHTIO)&&flag++);//檢測從機發出80us低電平是否結束
flag=2;
while((DHTIO)&&flag++); //檢測從機發出80us高電平是否結束
//開始采集數據
humidity_interger=recieve_data(); //采集濕度整數部分
humidity_decimal=recieve_data(); //采集濕度小數部分
temperature_integer=recieve_data(); //采集溫度整數部分
temperature_decimal=recieve_data(); //采集溫度小數部分
check=recieve_data(); //采集校驗位
DHTIO=1; //采集數據后主機拉高電平
}
}
void write_com(unsigned char com) //將模式設置指令或顯示地址寫入液晶模塊
{
RS=0;
RW=0;
LCDE=0;
P0=com;
delay(5);
LCDE=1;
delay(5);
LCDE=0;
}
void write_date(unsigned char date)//將數據（字符ASCII碼）寫入液晶模塊
{
RS=1;
RW=0;
LCDE=0;
P0=date;
delay(5);
LCDE=1;
delay(5);
LCDE=0;
}
void L1602_string(unsigned char hang,unsigned char lie,unsigned char p) //將數據寫入液晶模塊
{
unsigned char a;
if(hang == 1) a = 0x80; //顯示在第一行
if(hang == 2) a = 0xc0; //顯示在第一行
a = a + lie -1;
write_com(a);
write_date(p);
}
void init() //1602初始化
{
write_com(0x38);
write_com(0x0e);
write_com(0x06);
write_com(0x01);
write_com(0x80);
}
void xianshi1() //pm2.5顯示
{
L1602_string(1,1,'P');
L1602_string(1,2,'M');
L1602_string(1,3,'2');
L1602_string(1,4,'.');
L1602_string(1,5,'5');
L1602_string(1,6,':');
L1602_string(1,7,' ');
L1602_string(1,8,K/100+0x30);
L1602_string(1,9,(K-100*(K/100))/10+0x30);
L1602_string(1,10,K%10+0x30);
L1602_string(1,11,' ');
L1602_string(1,12,'u');
L1602_string(1,13,'g');
L1602_string(1,14,'/');
L1602_string(1,15,'m');
L1602_string(1,16,'3');
L1602_string(2,1,'T');
L1602_string(2,2,'e');
L1602_string(2,3,'m');
L1602_string(2,4,'p');
L1602_string(2,5,':');
L1602_string(2,6,digit[tempshi]);
L1602_string(2,7,digit[tempge]);
L1602_string(2,8,'C');
L1602_string(2,9,' ');
L1602_string(2,10,'H');
L1602_string(2,11,'u');
L1602_string(2,12,'m');
L1602_string(2,13,':');
L1602_string(2,14,digit[humshi]);
//L1602_string(2,14,(K-100*(K/100))/10+0x30);
L1602_string(2,15,digit[humge]);
//L1602_string(2,15,K%10+0x30);
L1602_string(2,16,'%');
}
void readDH() //溫濕度讀取
{
dht_start();
recieve_data();
dht_take_sample();
humshi=humidity_interger/10;
humge=humidity_interger%10;
tempshi=temperature_integer/10;
tempge=temperature_integer%10;
}
void Timer0Init()
{
RW=0;
LED=0;
TMOD|=0X01;//選擇為定時器0模式，工作方式1，僅用TR0打開啟動。
TH0=(65536-10000)%256;
TL0=(65536-10000)/256; //定時10ms
ET0=1;//打開定時器0中斷允許
EA=1;//打開總中斷
TR0=1;//打開定時器
}
void main() //主函數
{
int liu=0;
LCDE=0;
init();
Timer0Init();
while(1)
{
//liu++;
// if(liu==245)
//liu=0;
// K=Adc0832();
readDH();
xianshi1();
}
}
/**************************************
/*****定時器0中斷服務程序****/
void Timer0() interrupt 1
{
static u16 j;
// temp++;
TH0 = (65536-10000)%256;
TL0 = (65536-10000)/256;
LED=1;
//開啟傳感器的ＬＥＤ
for (j=0;j<222;j++); //0.28ms //延時0.28ms
K=Adc0832(); //開啟ADC采集
/* if(temp==20){
K+=40;
temp=0;
} */
//if(K>240)
//K=0;
//xianshi1();
TR0 = 0; //先關閉定時器0
EA = 0;
LED=0;
}

復制代碼

欧美极品高清xxxxhd,国产日产欧美最新,无码AV国产东京热AV无码,国产精品人与动性XXX,国产传媒亚洲综合一区二区,四库影院永久国产精品,毛片免费免费高清视频,福利所导航夜趣136