捏白大乳gif动态图A,欧美情趣在线观看,免费看性爱视频黄色网

#include<REG51.h>
#include<ABSACC.h>
#define COM8155 XBYTE[0X7F00]
#define PA8155 XBYTE[0X7F01]
#define PB8155 XBYTE[0X7F02]
#define PC8155 XBYTE[0X7F03]
typedef unsigned char uchar;
typedef unsigned int uint;
//8051的內部ＲＡＭ的地址范圍為００００Ｈ～００ＦＦＨ
//A :0X7F01 B:0X7F02 C:0X7F03 定時器低字節 0404H 定時器高字節：0405H
//命令/狀態：0X7F00
uchar code DIG_CODE[10]={
0x3f,0x06,0x5b,0x4f,0x66,
0x6d,0x7d,0x07,0x7f,0x6f
};
uchar code PCx[4] = {0xee,0xdd,0xbb,0x77};
sbit IO_M = P2^0;
sbit CE = P2^7;
uchar KeyValue=0;
uchar time1=0,time2=0;
uint msec = 0;
static uchar flag=0;
uint second=0;
uint CountDownSecond=0;
uchar c0,c1,c2,c3;
uchar KeyBoardScan();
void Delay10ms(uchar s);
void TimerConfig();
void digitronDisplay(uint second);
void Config_8155();
void operate(uchar KeyValue);
void Start();
void Stop();
void Pause();
void CountDown();
void SureStart();
void main(){
Config_8155();
while(1){
digitronDisplay(second);
operate(KeyBoardScan());
}
}
void Delay10ms(uchar s) //誤差 0us
{
unsigned char a,b;
for(s=1;s>0;s--)
for(b=38;b>0;b--)
for(a=130;a>0;a--);
}
void operate(uchar KeyValue){
switch(KeyValue){
case(1):Start();break;//開始
case(2):Stop();break;//清零
case(3):Pause();break;//暫停
case(4):CountDown();break;//倒計時
}
}
void Start(){
flag=1;
TimerConfig();
while(1){
digitronDisplay(second);
if(second==10000){
second=0;
}
digitronDisplay(second);
if(KeyBoardScan()!=1){
operate(KeyBoardScan());
}
}
}
void Stop(){
EA=0;//關總中斷
ET0=0;//關定時器0中斷
second = 0;
CountDownSecond=0;
while(1){
digitronDisplay(second);
operate(KeyBoardScan());
}
}
void Pause(){
ET0=0;//關定時器0中斷
while(1){
digitronDisplay(second);
operate(KeyBoardScan());
}
}
void CountDown(){ //設置倒計時時間
uint a=1;
while(1){
if(CountDownSecond<10000&&CountDownSecond>=0){ //顯示倒計時定時時間，如果倒計時時間超過范圍，倒計時定時時間為0
digitronDisplay(CountDownSecond);
}else{
CountDownSecond=0;
}
KeyValue = KeyBoardScan();//獲取鍵盤數字
switch(KeyValue){
case(7):{
CountDownSecond = CountDownSecond + a*100; //秒位加加
break;
}//定時間加
case(8):{
CountDownSecond = CountDownSecond - a*100;//秒位減減
break;
}//定時間減
case(9):SureStart();break;//啟動倒計時
}
}
}
void SureStart(){ //啟動倒計時
flag=2;
TimerConfig(); //配置定時中斷，中斷時間為10ms
while(1){
digitronDisplay(CountDownSecond);
if(KeyBoardScan()!=9){
operate(KeyBoardScan());
}
}
}
uchar KeyBoardScan(){ //行鍵盤掃描
uchar key;
uchar temp;
uchar i,j=0;
for(i=0;i<3;i++){
COM8155=0x0f; //pb輸出
if(i==0) PB8155 = 0xfe; //11111110
if(i==1) PB8155 = 0xfd;// 11111101
if(i==2) PB8155 = 0Xfb; //11111011
COM8155 = 0X0D; //pb輸入
temp=PB8155; //pb輸入讀取
temp=temp&0xf0;
if(temp!=0xf0){
Delay10ms(1);
temp = PB8155;
temp = temp&0xf0;
if(temp!=0xf0){
switch(temp){
case 0xe0:{
key = 7-i*3;
}
break;
case 0xd0:{
key = 8-i*3;
}
break;
case 0xb0:{
key = 9-i*3;
}
break;
}
}
return key;
}
}
return 10;
}
void Config_8155(){ //8155芯片的配置
CE = 0; //片選段，為8155的16位地址提供高8位地址 P2.0~P2.7:1
IO_M = 1; //作為I/O擴展
COM8155 = 0X0F; //A，B口做為輸出 C口作為輸入
}
void digitronDisplay(uint second){
uchar i=0;
uchar num[4];
num[3]=second/1000;
num[2]=second%1000/100;
num[1]=second%1000%100/10;
num[0]=second%1000%100%10;
PA8155=0xff;//消隱
for(i=0;i<4;i++){
switch(i){
case(3): PC8155=0x08;break;
case(2): PC8155=0x04;break;
case(1): PC8155=0x02;break;
case(0): PC8155=0x01;break;
}
if(i==2){
PA8155=~DIG_CODE[num[i]]&0x7f;
Delay10ms(1);
PA8155=0xff;//消隱
}else{
PA8155=~DIG_CODE[num[i]];
Delay10ms(1);
PA8155=0xff;//消隱
}
}
}
void TimerConfig(){
TMOD=0x01; //模式設置，00000001，可見采用的是定時器0，工作與模式1（M1=0，M0=1）。
TR0=1; //打開定時器
……………………
…………限于本文篇幅余下代碼請從51黑下載附件…………

復制代碼

欧美极品高清xxxxhd,国产日产欧美最新,无码AV国产东京热AV无码,国产精品人与动性XXX,国产传媒亚洲综合一区二区,四库影院永久国产精品,毛片免费免费高清视频,福利所导航夜趣136